Evolution v-tail

For the coming season a new version of the Evolution with a V-Tail was developed.The contest model Evolution is made for the F3B model category.

Evolution v-tail basic properties
Evolution Wing span: 3130 mm
Wing area: 59,58 dm2
Tailplane area: 5,6 dm2
Weight: from 2050 g

The preceding X-Tail version has fulfilled the goal for which it was designed. This is shown mainly by the victory of Andreas Böhlen in the Eurotour Contest in Salzburg and Hans Rossman at the Hohe Wand 2008 and many others placed in the contests. The whole conception of the model was kept. The V-Tail is made of 2 pieces. The standard version is made for the 2.4 GHz system...

Evolution x-tail

The contest model Evolution is made for the F3B model category. The design by Günther AichHolzer follows the current trend in the development of models for this category. This means a small fuselage diameter, a thinner wing and smaller wing area in comparison to the model Eagle.

Evolution x-tail basic properties
Evolution Wing span: 3140 mm
Wing area: 59,58 dm2
Tailplane area: 5,02 dm2
Weight: from 2150 g

Eagle v-tail

Model for use in F3B and F3F categories. It is produced in cooperation and under the design of the Austrian represent Guenter Aichholzer. It fulfills all the requests put on a F3B model. The tail has a v-conception. This construction makes it possible to lower the flying weight.

Eagle v-tail basic properties
Eagle v-tail Wing span: 3200 mm
Wing area: 63,88 dm2
Tailplane area: 6,4 dm2
Weight: from 2200 g

Eagle x-tail

The contest model Evolution is made for the F3B model category. The design by Günther AichHolzer follows the current trend in the development of models for this category. This means a small fuselage diameter, a thinner wing and smaller wing area in comparison to the model Eagle.

Eagle x-tail basic properties
Eagle x-tail Wing span: 3200 mm
Wing area: 63,88 dm2
Tailplane area: 5,42 dm2
Weight: from 2350 g

X-21 v-tail

Model made for flying in the F3B, F3F and F3J categories. T he model is made in fullcarbon version, which can withstand more stress. The F3J version of the model is lighter. The flying performance suits beginner F3x pilots also.

X-21 v-tail basic properties
Eagle x-tail Wing span: 3200 mm
Wing area: 60,4 dm2
Tailplane area: 6,2 dm2
Weight: from 2200 g
Desing and Programing: Michal Michna - 2009
  • © Jiri Tuma - JiTom
  • www.jitom.com
  • 2006-2009